top of page
BlueWaterlogo_blue.png

Heavy Rain and Your Pool: What to Do When Your Pool Overflows

Nov 12
5 min read

Arizona homeowners are no strangers to sunshine, but this fall has brought an unusually high amount of rainfall to the Valley. With El Niño contributing to wetter-than-normal conditions across the Southwest, we've seen more frequent storms, heavier downpours, and plenty of extra water making its way into backyard pools.

While a little rain might not seem like a big deal, repeated heavy rainfall can raise your pool's water level, introduce dirt and debris, and throw off your carefully balanced pool chemistry.


Whether your pool is overflowing or simply looking a little worse for wear after several rainy days, knowing what to check can help prevent bigger problems and get your pool back in shape.


Here are seven things to do after heavy rainfall.


1. Check Your Pool's Water Level

One of the first things you'll notice after heavy rainfall is a higher-than-normal pool water level. Most swimming pools are designed to maintain water around the middle of the skimmer opening. When the water rises above that level, your skimmer may not be able to collect leaves and other floating debris as effectively.


If your pool is significantly overfilled, you may need to lower the water level. Before doing so, check whether your pool has a built-in overflow system. If it doesn't, consult a pool professional about the safest way to remove excess water. Avoid draining more water than necessary, and never completely drain your pool without professional guidance.


A quick tip: Keep an eye on your water level during extended periods of rain, especially if more storms are in the forecast.


2. Remove Leaves, Dirt, and Other Debris

Rainstorms can bring plenty of unwanted guests into your pool. Leaves, branches, dust, dirt, and other debris can quickly accumulate, making your pool look less than inviting.


Once the weather clears, take some time to:

  • Skim leaves and floating debris from the surface.

  • Remove larger debris from the pool floor.

  • Empty your skimmer and pump baskets.

  • Brush the pool walls and floor to loosen dirt and sediment.

  • Check your filter for accumulated debris and clean it according to the manufacturer's recommendations.


Removing debris promptly helps your filtration system work more efficiently and prevents organic material from contributing to algae growth.


3. Heavy Rain Can Throw Off Your Pool Chemistry

Even if your pool looks relatively clean after a storm, the water chemistry may tell a different story.


Rainwater can dilute existing pool chemicals, while dirt, dust, organic debris, and runoff can introduce additional contaminants. All of this can affect your pool's chemical balance and make it harder to maintain clean, clear water.


After significant rainfall, it's important to test your water and check:

  • Chlorine levels: Rain and organic debris can increase sanitizer demand, making it harder to maintain adequate chlorine levels.

  • pH: Rainwater and contaminants can contribute to changes in your pool's pH.

  • Total alkalinity: This helps stabilize pH and can be affected by the addition of rainwater.

  • Water clarity: Cloudiness or discoloration may indicate that your filtration system needs attention or that your water chemistry is out of balance.


Resist the temptation to add a bunch of chemicals without testing first. Every pool is different, and adding chemicals without knowing what your water needs can create additional balancing problems.


A professional water test can help identify what's out of balance and determine the right adjustments to get your pool back to normal.


4. Pay Attention to Your Pool's Filtration System

Your pool's filtration system works hard to keep the water clean, and heavy rainfall can give it even more work to do.


Dirt, leaves, and other debris can clog skimmer baskets, fill pump baskets, and cause your filter to collect more material than usual.


After a storm, take a few minutes to inspect your equipment:

  • Empty the skimmer and pump baskets.

  • Check your filter pressure gauge for unusual readings.

  • Clean or backwash your filter when needed, following manufacturer recommendations.

  • Make sure water is circulating properly.

  • Look for visible leaks or signs of equipment damage.


If your equipment area has flooded, take extra precautions. Never operate electrical pool equipment that has been submerged or exposed to flooding until it has been inspected and cleared by a qualified professional.


A properly functioning filtration system is essential for restoring water clarity and keeping your pool clean after a storm.


5. Keep an Eye on Your Pool's Water Level and Autofill System

Here's something many Arizona pool owners may not realize: an overfilled pool can sometimes affect your automatic water fill system.


When heavy rain raises the water level, it can submerge the float on certain autofill valves. This may cause the system to continue adding water even when your pool doesn't need it.


If your pool has an autofill system, check that it's operating properly after significant rainfall. Depending on the system, temporarily turning off the autofill may help allow the water level to return to normal through natural evaporation.


Also, remember that not every pool has a traditional overflow drain. Some pools are designed so excess water can seep beneath the surrounding decking, which can create additional concerns if water accumulates around the pool.


If you notice persistent standing water, drainage issues, or unusual changes in your pool's water level, have a pool professional take a look.


6. Be Careful When Removing Excess Pool Water

If your pool is significantly overfilled, lowering the water level may be necessary. However, where and how you discharge that water matters.


Pool water contains chlorine, salts, and other chemicals that can negatively affect local waterways and the environment. Arizona municipalities have specific rules about pool water disposal, so don't assume it's okay to pump excess water into the street, gutter, alley, or storm drain.


Before draining your pool:

  • Check your city's pool water discharge requirements.

  • Make sure water stays on your property if using an approved landscape drainage method.

  • Be mindful of plants that may be sensitive to chlorine or salt.

  • Consult a pool professional if you're unsure how much water to remove or how to do it safely.


Remember: Never completely drain an inground pool without professional guidance. Groundwater conditions and soil pressure can create serious risks for the pool structure.


7. Know When It's Time to Call a Pool Professional

Sometimes a little extra cleaning and maintenance is all your pool needs after a storm. Other times, the effects of heavy rainfall can be more difficult to manage.


Consider reaching out to a pool professional if you notice:

  • Water that remains cloudy or discolored after cleaning.

  • Algae beginning to develop on pool surfaces.

  • Chemical levels that are difficult to balance.

  • Persistent water level or drainage issues.

  • Poor water circulation or unusual equipment behavior.

  • Signs of flooding or damage around your pool equipment.


Taking care of these issues early can help prevent more extensive maintenance problems down the road.


Keep Your Pool Clean and Balanced With Blue Water Pool Chemical Co.


Arizona weather can be unpredictable, but your pool care doesn't have to be.

At Blue Water Pool Chemical Co., we've been helping Valley homeowners keep their pools clean, clear, and properly maintained for more than 50 years. Our team provides residential weekly pool cleaning and chemical services throughout Phoenix, Scottsdale, Tempe, Mesa, Cave Creek, Peoria, and Glendale.


From keeping up with routine maintenance to addressing water chemistry concerns after a major storm, our experienced team can help take the guesswork out of pool care.


Don't let a few rainy days turn into weeks of pool problems. Contact Blue Water Pool Chemical Co. to learn more about our weekly pool maintenance and chemical service plans.


Call (480) 991-0302 or visit bluewaterchemical.com to get started!

Comments


bottom of page